Milky Cover Led Panel Light

Aluminum frame Led Panel Light

  • wattage:10W~70W
  • 100lm per watt.
  • CE SAA ErP

Milky Cover-Led Panel Light -10W-70W-100lm per watt

 Intelligent & smart Control for office, shopping mall lighting application



1808121810143959684.jpg




Product Model: 

Product Type: 

Wattage Range:

Rated Voltage:

Max. Working Voltage:

Led Chips-Led Driver:

Lumen Output:

IP Level:

CRI

HYL-PL

Milky Cover- Led Panel Light

10W

20W

40W

45W

60W

70W

220V AC

200~240V AC

SMD Led chips

Constant  Driver

100 lm per wattage

IP40

CRI-80


PRODUCT FEATURES:


Our panel Series LED Light is designed for  the commercial or workshop indoor lighting application mainly, The fixture is equipped with led chips with high efficiency, used to replace the existing FL ceiling fixtures, panel lighting is ideal for indoor office or workshop where the installation height is not higher over 5 meters.


The fixture designed with 100lm energy efficient, with different guide plates options, bright and uniform, without glare or flicker while with high CRI 80, providing  the excellent lighting experience.


SPECIFICATION:



Model

Voltage

CRI

LEDs

Lumen

Driver

PF

Beam

HYL-PL3030-10W

200-240V~

80

SMD 4014

100lm/w

Constant

> 0.93

120D


HYL-PL6030-20W

200-240V~

80

SMD 4014

100lm/w

Constant

> 0.93

HYL-PL6060-40W

200-240V~

80

SMD 4014

100lm/w

Constant

> 0.93

HYL-PL6060-45W

200-240V~

80

SMD 4014

100lm/w

Constant

> 0.93

HYL-PL12030-40W

200-240V~

80

SMD 4014

100lm/w

Constant

> 0.93

HYL-PL12030-45W

200-240V~

80

SMD 4014

100lm/w

Constant

> 0.93

HYL-PL12060-60W

200-240V~

80

SMD 4014

100lm/w

Constant

> 0.93

HYL-PL12060-70W

200-240V~

80

SMD 4014

100lm/w

Constant

> 0.93



Comply with CE-ROHS-ERP-SAA

EN 60598-1:2015; EN 60598-2-2:2012; EN 62493:205; EN   62471:2008; EN 62031:2008+A1:2013+A2:2015;

EN 55015:2013+A1:2015,EN 61547:2009;   EN 61000-3-2:2014; EN 61000-3-3:2013; EN   60598-2-25:1994+A1:2004

IEC 62321-3-1;   IEC   62321-5:2013;   IEC 62321-4:2013;   IEC 62321-6:2015;   IEC 62321-7-1:2015; IEC 62321:2008 ANNEX C

AS/NZS 60598.2.2:2016; AS/NZS 60598.1:2017;  AS/NZS 60598.1:2013; AS/NZS   60598.2.1:2016/NZS 60598.2.2:2016


PRODUCTS IMAGE:


20188915590333.jpg


DIMMING PRINCIPLE:


20188915590688.jpg

Instructions steps:


1: Lamp “Group Number” Set-up 

Turn off the lamp by switch for 3~5 seconds, Switch the lamp on, press the key “1” or “2” on the keyboard of the controller ( number to be optional from 1 to 99), and press the ID key. Suppose the above 2 lights with a circuit , choose number 1 and Press the ID key (means group 1 with 2 lights, this number “1” is these 2 lights group number ),  the 2 lights will flash 1 time, Switch the lamp off within 10 seconds and the “Group 1” set-up finished .


2: Lamp Control For dimming 


After step 1, switch the lights on, press the ID number firstly for the lights that you want to dim, and press the  “key of the brightness” on the controller and to dim the lights.  If  want to dim all the lights, suppose, there are 2 or 3 groups of lights in one area like office, than  could press the “All”  key of the controller to dim all the lights at the same time.


Attn: ( for more details, welcome to contact us)


INSTALLATION TIPS:


20188915590577.png



20188915590717.png

20188915590418.png

20188915590896.png

If you would like to make an enquiry, please contact us below directly!

Contact Us

Products or Service you’d like to know more :

  • Your Name:*

  • Company Name:*

  • Email Address:*

  • Your Message :*

Shanghai HYL Technology Co.,Ltd.

Building No.3-5, No.118, Lane 3588, Qi Lian Shan Road, Shanghai , China

enquiry@hyspectrum.com

+86-21-400-038-5933

Comodo SSL

Copyright@ Shanghai HYL Technology Co., Ltd. All Rights Reserved.